Subscribe to this collection to receive daily e-mail notification of new additions

Issue Date	Title	Author(s)
2023	Effect Of Temperature On Flexible Printed Circuit Board Layout During Reflow Soldering Process	Ishak M.H.H. ; Aziz, M. S. A. ; Ahmad M I ; Khor C.Y. ; Siahaan E.
2023	Optimization of Calcination Temperature to Synthesis ZnO Nanostructures as Photocatalyst Using Pineapple as Chelating Agent	Ismardi, A. ; Fathona, I. W. ; Rezky, A. N. ; Abdullah, N. H. ; Prastika, A. ; Prastika, A. F. A. ; Prastika, S. A. F. ; Gunawan, T. D.
2023	Optical Properties of TiO2 Doped ZnO-PVA Nanocomposites	Ismardi, A. ; Nasir, M. ; Khoiri, M. ; Abdullah, N. H. ; Gunawan, L. A. ; Rafsanjani, M. F. A. ; Mayundri, A. S. F. ; Gunawan, T. D.
2023	The Effect of Heat Treatment on Crystalline, Electrical and Optical Properties of ZnO/PVA Nanocomposites	Ismardi, A. ; Nasir, M. ; Abdullah, N. H. ; Fadila, W. R. ; Shentya, E. F. ; Ratnaduhita, S. ; Wahyudi, D. R.
2023	Solubilizing waste activated sludge via thermal treatment to enhance the biodegradability	Liew, C. S. ; Lim, J. W. ; Raksasat, R. ; Rawindran, H. ; Ho, Y. C. ; Mohamad, M. ; Kiatkittipong, W. ; Helmy, Q. ; Lam, M. K.
2023	Anaerobic digestion of sewage sludge for enhancing the growth of black soldier fly larvae	Raksasat, R. ; Lim, J. W. ; Kiatkittipong, W. ; Liew, C. S. ; Chin-Seng Liew ; Rawindran, H. ; Mohamad, M. ; Fuadi, A. M. ; Leong, S. Y.
2023	Comparison of quercetin yield obtained using convectional and ultrasound-assisted extraction from Chromolaena Odorata	Kamal, A. A. A. ; Mohamad, M. ; Masri, M.N. ; Teo, P.T. ; Shoparwe, N.F. ; Lim, J. W.
2023	Electrodeposition of Zn-Doped Cu2O-Cu/Ni for methylene blue photodegradation	Sutrisno M.G. ; Yusmaniar ; Noor A.M. ; Budi S.
2023	Optimization Study of Reactive Orange Dye Removal by Casuarina Equisetifolia Using Response Surface Methodology (RSM)	Yusop M.Z.I.M ; Mohamad M. ; Mohd N. ; Osman, W.H.W
2023	Inhibition Study on the Growth of Clostridium Saccharoperbutylacetonicum N1-4 (ATCC 13564) for the Production of Biobutanol in ABE Fermentation	Amin M.A. ; Shukor H. ; Shoparwe, N.F. ; Makhtar M.M.Z. ; Abdeshahian P. ; Oladokun S.O.
2023	Influence of Milling Parameters on the Characteristics of Alumina-Titania Nanocomposite Prepared by High-Energy Ball Milling	Asari S.A.M. ; Yusoff, M. ; Masri M.N. ; Jaafar, H. ; Razali M.H. ; Nik W.M.N.W.
2023	Influence of Epoxy Viscosity on Led Encapsulation Process	Jaludin A.A.A. ; Abdul Aziz M.S. ; Shing G.W. ; Ishak M.H.H. ; Rusdi M.S. ; Ahmad M.I.
2023	Implementation of fault tree analysis (FTA) in production process: A wood-based industry case study	Aina Z.N.R. ; Sobri, S.A. ; Shuaib N.A. ; Hendra H.M. ; Radzif T.M.
2023	Green Renewable Energy: Microbial Fuel Cell Technology	Tuesday M. ; Pusphanathan K. ; Sobri M.F.M. ; Makhtar M.M.Z. ; Shoparwe, N.F. ; Shukor H.
2022	Toward a Full Exploitation of IoT in Smart Cities: A Review of IoT Anomaly Detection Techniques	Ahmad M I ; Rasat M.S.M. ; Amin M.F.M. ; Elham P. ; Lateh H. ; Amin M.F.M.
2023	Performance of glued laminated timber (glulam) made from Rubberwood with different lamina assembly patterns and adhesive spreads rates	Hermawan, A. ; Sofi, A. Z. M. ; Roszalli M.N.
2022	Effect of styrene butadiene rubber on torque properties and morphological properties of kenaf core fiber reinforced polypropylene composites	Mohd S.H. ; Abu Bakar M.B. ; Mohamed, M ; Rosdi N.A.H.N. ; Rosdi N.A.M. ; Intapun J.
2022	Effect of the two-step sintering to the phase structure, microstructure and dielectric properties of undoped K0.5Na0.5NbO3-Based lead-free ceramics	Saari M.Q. ; Mohamed, J. J. ; Bahanurddin N.F.K. ; Jumali M.H. ; Rahman M.F.A. ; Yuwono A.H.
2022	Effect of travel angle on microstructure at heat affected zone of as welded carbon steel	Arifin A.J. ; Mamat, S. ; Azmi M. ; Muda W.S.H.W. ; Yuji T.
2022	Electrodeposition of AuPt nanoparticles for ethanol electrooxidation application	Budi S. ; Alawiyah M. ; Sugihartono I. ; Muhab S. ; Noor A.M.