1. My Scholar, Digital Library Repository, Universiti Malaysia Kelantan
  2. E- PROCEEDINGS
  3. Faculty of Earth Science - Proceedings
Please use this identifier to cite or link to this item: http://hdl.handle.net/123456789/1794
DC FieldValueLanguage
dc.contributor.authorYusoff, N.R.N.en_US
dc.contributor.authorWong F.S.F.S.en_US
dc.contributor.authorFathullah M.en_US
dc.date.accessioned2021-12-05T02:16:03Z-
dc.date.available2021-12-05T02:16:03Z-
dc.date.issued2021-05-
dc.identifier.isbn978-073544091-3-
dc.identifier.issn0094243X-
dc.identifier.urihttp://hdl.handle.net/123456789/1794-
dc.descriptionScopusen_US
dc.description.abstractThe production of activated carbon using heat from microwave processing for activation time was successfully conducted and its performance in treating textile dye effluent was observed through various factors such as phosphoric acid loading used, contact time, dosage of activated carbon and pH. Activated carbon with phosphoric acid loading of 60% shown highest BET surface area that was 213.52 m2/g however, it obtained least thermal stability. The result indicated that about 97.11% of dye from textile effluent can be removed in only 90 minutes of contact time at pH 3 with the use of 2.0 g of produced activated carbon. The production of activated carbon using microwave processing can be an alternative way for activation process using conventional furnace heating. The used of rubber wood sawdust as the raw material for activated carbon production can solve the waste issue from sawmill as an exampleen_US
dc.description.sponsorshipUniversiti Malaysia Kelantanen_US
dc.language.isoenen_US
dc.publisherAIP Conference Proceedingsen_US
dc.subjectActivated carbonen_US
dc.subjectMicrowave processingen_US
dc.subjectRubber wood sawdusten_US
dc.subjectTextile industryen_US
dc.subjectDyesen_US
dc.subjectDye propertiesen_US
dc.subjectDye wastewatersen_US
dc.subjectCarbonizationen_US
dc.titleProduction of activated carbon from rubber wood sawdust 8sing microwave processing for removal of textile dye effluenten_US
dc.typeNationalen_US
dc.relation.conferenceAIP Conference Proceedingsen_US
dc.identifier.doi10.1063/5.0044540-
dc.description.fundingR/RAGS/A08.00/00235A/001/2015/000198en_US
dc.description.page1-7en_US
dc.volume2339en_US
dc.relation.seminar6th International Conference on Green Design and Manufacture 2020, IConGDM 2020en_US
dc.description.articleno2339en_US
dc.date.seminarstartdate2020-07-23-
dc.date.seminarenddate2020-07-24-
dc.description.placeofseminarArauen_US
dc.description.typeIndexed Proceedingsen_US
dc.contributor.correspondingauthornraihan@umk.edu.myen_US
item.languageiso639-1en-
item.grantfulltextopen-
item.openairetypeNational-
item.fulltextWith Fulltext-
Appears in Collections:Faculty of Earth Science - Proceedings
Files in This Item:
File Description SizeFormat
Production of Activated Carbon from Rubber Wood.pdf520.74 kBAdobe PDFView/Open
Show simple item record

Google ScholarTM

Check

Altmetric

Altmetric


Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.