Please use this identifier to cite or link to this item:
http://hdl.handle.net/123456789/3572
DC Field | Value | Language |
---|---|---|
dc.contributor.author | Hermawan, A. | en_US |
dc.contributor.author | Rasid S.A. | en_US |
dc.contributor.author | Omar S. | en_US |
dc.contributor.author | Shuhaimin M.A. | en_US |
dc.date.accessioned | 2022-12-05T07:11:51Z | - |
dc.date.available | 2022-12-05T07:11:51Z | - |
dc.date.issued | 2022 | - |
dc.identifier.issn | 0094243X | - |
dc.identifier.uri | http://hdl.handle.net/123456789/3572 | - |
dc.description | Scopus | en_US |
dc.description.abstract | Azadirachta excelsa, known as Sentang by a native, a fast-growing and light-hardwood tree, was one of the selected species included in forest plantation projects in the mid-1990s by the Malaysian government to supply timber demands for local and international markets. Ambiguity has been pointed out about the species potential due to understudied and limited data available regarding the properties of the tree. This paper investigates the physical properties of 26 years old Sentang tree planted at Jeli, Kelantan, Malaysia. This paper focuses on the effects of radial growth rates on moisture content, density, and shrinkage from the pith to the bark at the stump, diameter-breast height (DBH), middle, and top of the trees. Three trees were categorized into slow, average, and fast growth rates were selected and harvested for this purpose. The green moisture content (MC) of all the categorized trees tends to decrease from the pith to the bark. However, the same tendency was not observed in the density. As predicted, the shrinkage in the tangential direction is higher than in radial and longitudinal directions. | en_US |
dc.publisher | American Institute of Physics Inc. | en_US |
dc.subject | Azadirachta excelsa | en_US |
dc.title | Physical properties of 26 years old sentang (Azadirachta excelsa) planted at Batu Melintang, Kelantan | en_US |
dc.type | International | en_US |
dc.relation.conference | AIP Conference Proceedings | en_US |
dc.identifier.doi | 10.1063/5.0078463 | - |
dc.volume | 2454 | en_US |
dc.relation.seminar | 2021 International Conference on Bioengineering and Technology, IConBET2021 | en_US |
dc.description.articleno | 080003 | en_US |
dc.date.seminarstartdate | 2022-05-24 | - |
dc.date.seminarenddate | 2022-05-25 | - |
dc.description.placeofseminar | Virtual | en_US |
dc.description.type | Indexed Proceedings | en_US |
dc.contributor.correspondingauthor | andi@umk.edu.my | en_US |
item.fulltext | No Fulltext | - |
item.openairetype | International | - |
item.grantfulltext | none | - |
crisitem.author.dept | Universiti Malaysia Kelantan | - |
Appears in Collections: | Faculty of Bioengineering and Technology - Proceedings |
Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.